CTBAIER NP13LP NP18LP Replacement Inexpensive Projector V2 Bulb NEC for Lamp $23 CTBAIER NP13LP/NP18LP Replacement Projector Lamp Bulb for NEC V2 Office Products Office Electronics Video Projectors Accessories $23 CTBAIER NP13LP/NP18LP Replacement Projector Lamp Bulb for NEC V2 Office Products Office Electronics Video Projectors Accessories $23,V2,NEC,Bulb,Office Products , Office Electronics , Video Projectors Accessories,NP13LP/NP18LP,ohcrop.com,CTBAIER,Replacement,/antiplatelet336505.html,Projector,Lamp,for CTBAIER NP13LP NP18LP Replacement Inexpensive Projector V2 Bulb NEC for Lamp $23,V2,NEC,Bulb,Office Products , Office Electronics , Video Projectors Accessories,NP13LP/NP18LP,ohcrop.com,CTBAIER,Replacement,/antiplatelet336505.html,Projector,Lamp,for

CTBAIER NP13LP NP18LP Replacement Inexpensive Projector V2 Bulb NEC for Lamp A surprise price is realized

CTBAIER NP13LP/NP18LP Replacement Projector Lamp Bulb for NEC V2

$23

CTBAIER NP13LP/NP18LP Replacement Projector Lamp Bulb for NEC V2

|||

Product description

This is a high quality projector wick, high brightness, long life, excellent visual effects, so that you can experience the same hd images as the cinema at home.
Bulb model: NP13LP/NP18LP/60003128/60002853
Working hours :3000-4000 hours
Warranty period :200 days
Bulb type: Projector Lamp Bulb with housing
Applicable model: NEC V230 V230X V260W V260R V260X V260 V260G NP110 NP115 NP115G NP210 NP210G NP215 NP215G NP216 NP216G NP216GEDU NP-V300W NP-V300X NP-V300XG NP-V300WG V281W V311W V311X VE280 VE280X VE281 VE281X VE282 VE282X with Housing

When to change projector bulbs:

When the projector indicator light flashes orange, the projected image becomes darker or blurrier than before.When the projector is on, the message to change the light bulb will appear on the screen. In order to get a good projection effect, it is recommended that you change the light bulb.

How to replace projector bulbs:
1. Turn off the projector and unplug the power cord
2. Let the projector cool for at least an hour. The bulb is very hot after use
3. Use a screwdriver to remove the screws from the lid and slide the lampshade open
Loosen the two screws holding the bulb in place
5. Hold the bulb and pull it out straight
6. Use the opposite steps to place the new bulb back in the projector and tighten the screws
7. Reinstall the lampshade and reset the life of the bulb
8. Installation is complete

Note:
1. Before purchase, please confirm that the bulb of this projector is compatible with the projector. If you cannot find the model of the projector on the page, please contact us
2. To avoid burns, allow the projector to cool for at least 60 minutes before changing the bulb

CTBAIER NP13LP/NP18LP Replacement Projector Lamp Bulb for NEC V2

Box Office: 01379 652241

DISS • NORFOLK